Carbide Drill for SR Machining NC Program Creation Software
- supported language
- Japanese
- Operating environment
- Windows 7, 8, 10
- Required software
- Excel
Bug in NC program creation software for carbide drills for SR machining
There was a problem in the program creation software for carbide drill NC for SR processing.
For customers who have downloaded the program before June 9, 2021, we apologize for the inconvenience, but please discard the existing program and download it again.
Depending on the browser you are using, you may not be able to open the Excel file properly. In that case, please try using a different browser, or select "Save As" after selecting the above link, save it to your desktop, etc., and then open the file. We apologize for the inconvenience, but thank you in advance.
In addition, since this software is created in Excel using macros, it will not work unless macro settings are enabled. Please enable macro settings. Also, please note that we are not responsible for any problems caused by changing settings.
- Please refer to Windows help for the macro setting procedure.
Program creation example
Here is an example of creating a main program. The creation method uses ATC in the ABS directive.
*The programming code may differ depending on the machine used.
T1
M06
G90G17G54G00X0.Y0.(Processing position)
G43Z50.H01 (set initial point)
M07 (coolant ON)
M98P100
M09 (coolant off)
M05
M30
Support tools
-
TOOL SEARCHClick here for details
-
Carbide
thread cutter
NC program
creation softwareClick here for details -
Carbide NSB
Non-step machining
NC program
Creation softwareClick here for details -
For SR processing
carbide drill
NC program
creation softwareClick here for details -
CAD/CAM
Support
data packClick here for details -
Cutting power calculation
for various toolsClick here for details
Inquiry
Weekdays 0:00-00:00
*Technical Inquiry
Various Inquiry
E-mail magazine registration